The publishers hold the copyright of these publications. The PDFs are provided here to ensure rapid dissemination of scholarly work. It is understood that you will use them only in a manner consistent with the fair use provisions of the relevant copyright laws. You may not distribute them or use them for any commercial purpose.

Go to: Back,  Previous Year

Journal Articles 2017

Cinefra M., Petrolo M., Li G., Carrera E., "Variable kinematic shell elements for composite laminates accounting for hygrothermal effects", Journal of Thermal Stresses (2017), 40(12), pp. 1523-1544.

Cinefra M., Petrolo M., Li G., Carrera E., "Hygrothermal analysis of multilayered composite plates by variable kinematic finite elements", Journal of Thermal Stresses (2017), 40(12), pp. 1502-1522.

Cinefra M., Carrera E., Lamberti A., Petrolo M., "Best theory diagrams for multilayered plates considering multifield analysis", Journal of Intelligent Material Systems and Structures (2017), 28(16), pp. 2184-2205.

Kaleel I., Petrolo M., Waas A.M., Carrera E., "Computationally efficient, high-fidelity micromechanics framework using refined 1D models", Composite Structures (2017), 181, pp. 358-367.

Carrera E, Valvano S, Kulikov GM, "Multilayered plate elements with node-dependent kinematics for electro-mechanical problems", International Journal of Smart and Nano Materials (2017), DOI: 10.1080/19475411.2017.1376722

Keshava Kumar S., Harursampath D., Carrera E., Cinefra M., Valvano S. "Modal analysis of delaminated plates and shell using Carrera Unified Formulation-MITC9 shell element", Mechanics of Advanced Materials and Structures (2017), DOI: 10.1080/15376494.2017.1302024.

Carrera, E.; Zappino, E. "One-dimensional finite element formulation with node-dependent kinematics", COMPUTERS & STRUCTURES, vol. 192, pp. 114-125.

Cavallo T., Zappino E.; and Carrera E. "Component-wise vibration analysis of stiffened plates accounting for stiffener modes", CEAS AERONAUTICAL JOURNAL, vol. 8 n. 2, pp. 385-412.

Zappino, E.; Viglietti, A.; Carrera, E. "The analysis of tapered structures using a component-wise approach based on refined one-dimensional models"., AEROSPACE SCIENCE AND TECHNOLOGY, vol. 65, pp. 141-156.

Sheikholeslami, S.A.; Aghdam, M.M.; Zappino, E; Carrera, E. "Application of refined beam elements to the coupled-field analysis of magnetostrictive microbeams", COMPOSITES. PART B, ENGINEERING, vol. 115, pp. 14-20.

Cavallo T., Zappino E., Carrera E., "Free-vibration analysis of space vehicle structures made by composite materials", Composite Structures, In press, 

Zappino E., Viglietti A., Carrera E., "Analysis of tapered composite structures using a refined beam theory", Composite Structures, In press,

Pagani A, Yan Y, Carrera E. "Exact solutions for free vibration analysis of laminated, box and sandwich beams by refined layer-wise theory", Composites Part B (2017), 131, pp. 62-75.

de Miguel A.G., Pagani A., Yu W., Carrera E., "Micromechanics of periodically heterogeneous materials using higher order beam theories and the mechanics of structure genome", Composite Structures (2017), 180, pp. 484-496.

Carrera E., Cavallo T., Zappino E., "Effect of Solid Mass Consumption on the Free-Vibration Analysis of Launchers", Journal of Spacecraft and Rockets (2017), 54(3), pp. 773-780.

Petrolo M., Carrera E., de Visser C., D'Ottavio M., Polit O., "Further results on the development of a novel VTOL aircraft, the Anuloid. Part II: Flight Mechanics", Advances in Aircraft and Spacecraft Science (2017), 4(4), pp. 421-436.

Petrolo M., Carrera E., Iuso G., Patek Z., Janda Z., "Further results on the development of a novel VTOL aircraft, the Anuloid. Part I: Aerodynamics", Advances in Aircraft and Spacecraft Science (2017), 4(4), pp. 401-419.

Yarasca J., Mantari J.L., Petrolo M., Carrera E., "Multiobjective Best Theory Diagrams for cross-ply composite plates employing polynomial, zig-zag, trigonometric and exponential thickness expansions", Composite Structures (2017), 176, pp. 860-876.

Entezari A, Filippi M, Carrera E. "On dynamic analysis of variable thickness disks and complex rotors subjected to thermal and mechanical -prestresses", Journal of Sound and Vibration, 405 (2017), pp. 68-85. doi: 10.1016/j.jsv.2017.05.039. 

Pagani A, de Miguel AG, Carrera E. "Cross-sectional mapping for refined beam elements with applications to shell-like structures", Computational Mechanics (2017), 59(6), pp. 1031-1048. doi: 10.1007/s00466-017-1390-7.

Yan Y, Pagani A, Carrera E. "Exact solutions for free vibration analysis of laminated, box and sandwich beams by refined layer-wise theory", Composite Structures (2017), 175, pp. 28-45.

Carrera E, Valvano S. "A variable kinematic shell formulation applied to thermal stress of laminated structures", Journal of Thermal Stresses (2017), 40(7):803-827. doi: 10.1080/01495739.2016.1253439.

Carrera E., Valvano S. "Analysis of laminated composite structures with embedded piezoelectric sheets by variable kinematic shell elements", Journal of Intelligent Material Systems and Structures, pp.1-29. (2017), doi:10.1177/1045389X17704913.

Candiotti S., Mantari J.L., Yarasca J., Petrolo M., Carrera E.. "An axiomatic/asymptotic evaluation of best theories for isotropic metallic and functionally graded plates employing non-polynomic functions", Aerospace Science and Technology (2017), 68, pp. 179-192.

Zappino E., Li G., Pagani A., Carrera E.. "Global-local analysis of laminated plates by node-dependent kinematic finite elements with variable ESL/LW capabilities", Composite Structures (2017), 172, pp. 1-14.

Valvano S., Carrera E.. "Multilayered plate elements with Node-dependent kinematics for the analysis of composite and sandwich structures", FACTA UNIVERSITATIS (2017), Series: Mechanical Engineering Vol. 15, No 1, pp. 1 - 30.

Kulikov G., Carrera E., Plotnikova S.V.. "Hybrid-Mixed quadrilateral element for laminated plates composed of functionally graded materials", Advanced Materials & Technologies (2017), 1, pp. 44-55.

Pagani A., Carrera E., Jamshed R. "Application of aerospace structural models to marine engineering", Advances in Aircraft and Spacecraft Science (2017), 4(3), pp. 219-235.

Akoussan K., Boudaoud H., Daya E.M., Koutsawa Y., Carrera E.. "Numerical method for nonlinear complex eigenvalues problems depending on two parameters: Application to three-layered viscoelastic composite structures", Mechanics of Advanced Materials and Structures (2017)

Pagani A., Carrera E.. "Large-deflection and post-buckling analyses of laminated composite beams by Carrera Unified Formulation", Composite Structures (2017), 170, pp. 40-52.

Pagani A., Carrera E.. "Unified formulation of geometrically nonlinear refined beam theories", Mechanics of Advanced Materials and Structures (2017).

Carrera E., Pagani A., Valvano S.. "Multilayered plate elements accounting for refined theories and node-dependent kinematics", Composites Part B: Engineering (2017), 114, pp. 189-210.

Carrera E., Pagani A., Valvano S.. "Shell elements with through-the-thickness variable kinematics for the analysis of laminated composite and sandwich structures", Composites Part B: Engineering (2017), 111, pp. 294-314.

Carrera E., de Miguel A.G., Pagani A., "Hierarchical theories of structures based on Legendre polynomial expansions with finite element applications", International Journal of Mechanical Sciences (2017), 120, pp. 286-300.

Yarasca J., Mantari J.L., Petrolo M., Carrera E., "Best theory diagrams for cross-ply composite plates using polynomial, trigonometric and exponential thickness expansions", Composite Structures (2017), 161, pp. 362-383.

Maiarù M., Petrolo M., Carrera E., "Evaluation of energy and failure parameters in composite structures via a Component-Wise approach", Composites Part B (2017), 108, pp. 53-64.

Go to: Back,  Previous Year,  Next Year,  Top

 

Journal Articles 2016

Cinefra M, Valvano S, “A variable kinematic doubly-curved MITC9 shell element for the analysis of laminated composites”, Mechanics of Advanced Materials and Structures (2016), 23(11): 1312-1325, DOI: 10.1080/15376494.2015.1070304

Pagani A, Valvano S, Carrera E, “Analysis of laminated composites and sandwich structures by variable-kinematic MITC9 plate elements”, Journal of Sandwich Structures and Materials (2016), DOI: 10.1177/1099636216650988

Messina A., Carrera E., "Three-dimensional analysis of freely vibrating multilayered piezoelectric plates through adaptive global piecewise-smooth functions", Journal of Intelligent Material Systems and Structures (2016), 27(20), pp. 2862-2876.

Pagani A., de Miguel A.G., Petrolo M., Carrera E., "Analysis of laminated beams via Unified Formulation and Legendre polynomial expansions", Composite Structures (2016), 150, pp. 78-92.

Filippi M., Petrolo M.. Valvano S., Carrera E., "Analysis of laminated composites and sandwich structures by trigonometric, exponential and miscellaneous polynomials and a MITC9 plate element" Composite Structures (2016), 150, pp. 103-114. 

Carrera E., Zappino E., "Carrera Unified Formulation for Free-Vibration Analysis of Aircraft Structures", AIAA Journal (2016), 54(1) pp. 280-292.

Giunta G., De Pietro G., Nasser H., Belouettar S., Carrera E., Petrolo M., "A thermal stress finite element analysis of beam structures by hierarchical modelling" Composites Part B (2016), 95, pp. 179-195.

Filippi M., Carrera M., "Capabilities of 1D CUF-based models to analyse metallic/composite rotors" Advances in Aircraft and Spacecraft Science (2016), 3(1), pp. 1-14.

Filippi M., Carrera E., Regalli A.R., "Layerwise analyses of compact and thin-walled beams made of viscoelastic materials" Journal of Vibration and Acoustics (2016), 138, pp. 064501 (1-9).

Filippi M., Carrera E.. "Aerodynamic and mechanical hierarchical aeroelastic analysis of composite wings" MAMS Journal (2016), 23(9), pp. 997-1004.

Zappino E., Carrera E., Rowe S., Mangeot C., Marques H., "Numerical analyses of piezoceramic actuators for high-temperature applications", Composite Structures (2016), 151, pp. 36-46.

Carrera E., Zappino E., Cavallo T.,"Static analysis of reinforced thin-walled plates and shells by means of finite element models", International Journal for Computational Methods in Engineering Science and Mechanics (2016), 17(2), pp. 106-126.

Carrera E., Pagani A., Petrolo M.. "Free vibrations of damaged aircraft structures by component-wise analysis" AIAA Journal (2016), 50(10), pp. 3091-3106.

Carrera E., Filippi M., Mahato P.K.R., Pagani A.. "Free-vibration tailoring of single- and multi-bay laminated box structures by refined beam theories", Thin-Walled Structures (2016), 109, pp. 40-49.

Ramos I.A., Mantari J.L., Pagani A., Carrera E.. "Refined theories based on non-polynomial kinematics for the thermoelastic analysis of functionally graded plates", Journal of Thermal Stresses (2016), 39(7), pp. 835-853.

Petrolo M., Lamberti A., Miglioretti F.. "Best theory diagram for metallic and laminated composites plate", Mechanics of Advanced Materials and Structures (2016), 23(9), pp. 1114-1130

Zappino E., Cavallo T., Carrera E.. "Free vibration analysis of reinforced thin-walled plates and shells through various finite element models", Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2015.1121562

Carrera E., Pagani A., Banerjee J.R.. "Linearized buckling analysis of isotropic and composite beam-columns by Carrera Unified Formulation and dynamic stiffness method", Mechanics of Advanced Materials and Structures (2016), 23(9), pp. 1092-1103

Pagani A., Carrera E., Ferreira A.J.M.. "Higher-order theories and radial basis functions applied to free vibration analysis of thin-walled beams", Mechanics of Advanced Materials and Structures (2016), 23(9), pp. 1080-1091

Carrera E., Pagani A., Jamshed R.. "Refined beam elements for static and dynamic analysis of hull structures", Computers and Structures (2016), 167, pp. 37-49

Cinefra M., Valvano S., Carrera E.. "Thermal stress analysis of laminated structures by a variable kinematic MITC9 shell element", Journal of Thermal Stresses (2016), 39(2), pp. 121-141

Carrera E., Pagani A.. "Accurate Response of Wing Structures to Free-Vibration, Load Factors, and Nonstructural Masses", AIAA Journal (2016), 54(1), pp. 227-241

Carrera E., Filippi M.. "A refined one-dimensional rotordynamics model with three-dimensional capabilities", Journal of Sound and Vibration (2016), 366, pp. 343-356

Filippi M., Pagani A., Petrolo M.. "Australasian Research on Applied Mechanics and Aerospace - Preface",  Advances in Aircraft and Spacecraft Science (2016), 3(1), pp. i-iii. DOI: 10.12989/aas.2016.3.1.00i

Petrolo M., Carrera E., Alawami A.S.A.S.. "Free vibration analysis of damaged beams via refined models", Advances in Aircraft and Spacecraft Science (2016), 3(1), pp. 95-112

Pagani A., Carrera E.. "Gasdynamics of rapid and explosive decompressions of pressurized aircraft including active venting", Advances in Aircraft and Spacecraft Science (2016), 3(1), pp. 77-93

Mantari J.L., Ramos I.A., Carrera E., Petrolo M.. "Static analysis of functionally graded plates using new non-polynomial displacement fields via Carrera Unified Formulation", Composites Part B (2016), 89, pp. 127-142

Giunta G., Belouettar S., Carrera E.. "A Thermal Stress Analysis of Three-Dimensional Beams by Refined One-Dimensional Models and Strong Form Solutions", Applied Mechanics and Materials (2016), 828, pp. 139-171

Botshekanan Dehkordi M., Khalili S.M.R., Carrera E.. "Non-linear transient dynamic analysis of sandwich plate with composite face-sheets embedded with shape memory alloy wires and flexible core-based on the mixed LW (layer-wise)/ESL (equivalent single layer) models", Composites Part B (2016), 87, pp. 59-74

Carrera E., Filippi M., Mahato P.K., Pagani A.. "Accurate static response of single- and multi-cell laminated box beams", Composite Structures (2016), 136, pp. 372-383

Dan M., Pagani A., Carrera E.. "Free vibration analysis of simply supported beams with solid and thin-walled cross-sections using higher-order theories based on displacement variables", Thin-Walled Structures (2016), 98, pp. 478-495

Petrolo M., Lamberti A.. "Axiomatic/asymptotic analysis of refined layer-wise theories for composite and sandwich plates", Mechanics of Advanced Materials and Structures (2016), 23(1), pp. 28-42

 
 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2015

 

Carrera E., Filippi, M.. "Vibration analysis of thin/thick, composites/metallic spinning cylindrical shells by refined beam models", Journal of Vibration and Acoustics (2015), 137, pp. 031020 (1-9)

Carrera E., Zappino E., Cavallo T.. "Accurate Free Vibration Analysis of Launcher Structures Using Refined 1D Models", International Journal of Aeronautical and Space Sciences (2015), 16(2), pp. 206-222

Pagani A., Petrolo M., Colonna G., Carrera E.. "Dynamic response of aerospace structures by means of refined beam theories", Aerospace Science and Technology (2015), 46, pp. 360-373

Filippi M., Pagani A., Petrolo M., Colonna G., Carrera E.. "Static and free vibration analysis of laminated beams by refined theory based on Chebyshev polynomials", Composite Structures (2015), 132, pp. 1248-1259

Cinefra M., Valvano S., Carrera E.. "A layer-wise MITC9 finite element for the free-vibration analysis of plates with piezo-patches", International Journal of Smart and Nano Materials (2015), 6(2), pp. 85-104

Carrera E., Pagani A.. "Evaluation of the accuracy of classical beam FE models via locking-free hierarchically refined elements", International Journal of Mechanical Sciences (2015), 100, pp. 169-179

Carrera E., Filippi M., Mahato P.K.R., Pagani A.. "Advanced models for free vibration analysis of laminated beams with compact and thin-walled open/closed sections", Journal of Composite Materials (2015), vol. 49(17), pp. 2085-2101

Carrera E., Pagani A., Petrolo M., Zappino E.. "Recent developments on refined theories for beams with applications", Mechanical Engineering Reviews, Bulletin of the Japan Society of Mechanical Engineers JSME (2015), vol. 2, n° 2, p. 14-00298

Cinefra M., Valvano S., Carrera E.. "Heat conduction and Thermal Stress Analysis of laminated composites by a variable kinematic MITC9 shell element", Curved and Layered Structures (2015), De Gruyter Open, 2, pp. 301-320

Carrera E., Abouelregal A.E., Abbas I.A., Zenkour A.M.. "Vibrational Analysis for an Axially Moving Microbeam with Two Temperatures", Journal of Thermal Stresses (2015), 38, pp. 569-590

Carrera E., Cinefra M., Lamberti A., Petrolo M.. "Results on best theories for metallic and laminated shells including Layer-Wise models", Composite Structures (2015), 126, pp. 285-298

Carrera E., Pagani A., Petrolo M.. "Refined 1D Finite Elements for the Analysis of Secondary, Primary, and Complete Civil Engineering Structures", Journal of Structural Engineering ASCE (2015), 141(4), art. no. 04014123, doi: 10.1061/(ASCE)ST.1943-541X.0001076

Petrolo M., Cinefra M., Lamberti A., Carrera E.. "Evaluation of Mixed Theories for Laminated Plates through the Axiomatic/Asymptotic Method", Composites Part B (2015), 76, pp. 260-272

Messina A., Carrera E.. "Three-dimensional free vibration of multi-layered piezoelectric plates through approximate and exact analysis", Journal of Intelligent Material Systems and Structures (2015),  26(5), pp. 489-504

Filippi M., Carrera E., Zenkour A.M.. "Static analyses of FGM beams by various theories and finite elements", Composites: Part B (2015), 72, pp. 1-9

Carrera E., Pagani A., Zangallo F.. "Comparison of various 1D, 2D and 3D FE models for the analysis of thin-walled box with transverse ribs subjected to load factors", Finite Elements in Analysis and Design (2015), 95, pp. 1-11

Swaminathan K., Naveenkumar D.T., Zenkour A.M., Carrera E.. "Stress, vibration and buckling analysis of FGM plates- A state of the art review", Composite Structures (2015), 120, pp. 10-31

Cinefra M., Carrera E., Valvano S.. "Variable Kinematic Shell Elements for the Analysis of Electro-Mechanical Problems", Mechanics of Advanced Materials and Structures (2015), 22(1-2), pp. 77-106

Miglioretti F., Carrera E.. "Application of a Refined Multi-Field Beam Model for the Analysis of Complex Configurations", Mechanics of Advanced Materials and Structures (2015), 22(1-2), pp. 52-66

Cinefra M., Lamberti A., Zenkour Ashraf M., Carrera E.. "Axiomatic/Asymptotic Technique Applied to Refined Theories for Piezoelectric Plates", Mechanics of Advanced Materials and Structures (2015), 22(1-2), pp. 107-124

Carrera E., Cinefra M.. "Guest Editorial of MAMS Special Issue on Modeling and Analysis of Smart Structures", Mechanics of Advanced Materials and Structures (2015), 22(1-2), pp. 1-2

 

 

Go to: BackPrevious YearNext YearTop

 

 Journal Articles 2014

 

Carrera E., Cinefra M., Petrolo M., Zappino E.. "Comparison between 1D (Beam) and 2D (Plate/Shell) Finite Elements to Analyze Thin Walled Structures", Aerotecnica Missili & Spazio, The Journal of Aerospace Science, Technology and Systems (2014), 93(1-2), pp 3-16

Carrera E., Filippi M.. "Variable Kinematic One-Dimensional Finite Elements for the Analysis of Rotors Made of Composite Materials", Journal of Engineering for Gas Turbines and Power (2014)

Carrera E., Filippi M., Zappino E.. "Free vibration analysis of laminated beam by polynomial, trigonometric, exponential and zig-zag theories", Journal of Composite Materials (2014), 48(19), pp. 2299-2316

Kumar Keshava S., Cinefra M., Carrera E., Ganguli R., Harursampath D.. "Finite element analysis of free vibration of the delaminated composite plate with variable kinematic multilayered plate elements", Composites: Part B (2014), 66, pp. 453-465

Mashat D.S., Carrera E., Zenkour A.M., Al Katheeb S.A., Lamberti A.. "Evaluation of refined theories for multilayered shells via Axiomatic/Asymptotic method", Journal of Mechanical Science and Technology (2014), 28(11), pp. 4663-4672

Varello A., Carrera E.. "Free Vibration Response of Thin and Thick Nonhomogeneous Shells by Refined One-Dimensional Analysis", Journal of Vibration and Acoustics (2014), 136(6)

Pagani A., Carrera E., Banerjee J.R., Cabral P.H., Caprio G., Prado A.. "Free vibration analysis of composite plates by higher-order 1D dynamic stiffness elements and experiments", Composite Structures (2014), 118, pp. 654-663

Fazzolari F.A., Carrera E., "Thermal Stability of FGM Sandwich Plates under Various Through-the-Thickness Temperature Distributions", Journal of Thermal Stresses (2014), 37, pp. 1449-1481

Akoussan K., Boudaoud H., El Mostafa D., Carrera E.. "Vibration Modeling of Multilayers Composite Structures with Viscoelastic Layers", Mechanics of Advanced Materials and Structures (2014),  22(1-2), pp. 136-149

Miglioretti F., Carrera E., Petrolo M.. "Variable Kinematic Beam Elements for Electro-Mechanical Analysis", Smart Structures and Systems (2014), 13(4), pp. 517-546

Carrera E., Pagani A.. "Free vibration analysis of civil engineering structures by component-wise models", Journal of Sound and Vibration (2014), 333, pp. 4597-4620

Petrolo M., Carrera E., D'Ottavio M., De Visser C., Pàtek Z., Janda Z.. "On the development of the Anuloid, a disk-shaped VTOL aircraft for urban areas", Advances in Aircraft and Spacecraft Science (2014), 1(3), pp. 353-378

Giunta G., Belouettar S., Biscani F., Carrera E.. "Hierarchical theories for a linearised stability analysis of thin-walled beams with open and closed cross-section", Advances in Aircraft and Spacecraft Science (2014), 1(3), pp. 253-271

Seremet V., Carrera E.. "Solution in Elementary Functions to a BVP of Thermoelasticity: Green's Functions and Green's-type Integral Formula for Thermal Stresses Within a Half-Strip", Journal of Thermal Stresses (2014), 37, pp. 947-968

Varello A., Carrera E.. "Nonhomogeneous atherosclerotic plaque analysis via enhanced 1D structural models", Smart Structures and Systems (2014), 13(4), pp. 659-683

Carrera E., Cinefra M., Zappno E., Succi L.. "Effects of Thermo-Mechanical Loads on Aeroelastic Instabilities of Metallic and Composite Panels", Transactions of Nanjing University of Aeronautics and Astronautics (2014), 31(2), pp. 118-123

Cinefra M., Chinosi C., Della Croce L., Carrera E.. "Refined shell finite elements based on RMVT and MITC for the analysis of laminated structures", Composite Structures (2014), 113, pp. 492-497

Mashat Daoud S., Carrera E., Zenkour Ashraf M., Al Khateeb Sadah A.. "Use of axiomatic/asymptotic approach to evaluate various refined theories for sandwich shells", Composite Structures (2014), 109, pp. 139-149

Fazzolari F.A., Carrera E.. "Refined hierarchical kinematics quasi-3D Ritz models for free vibration analysis of doubly curved FGM shells and sandwich shells with FGM core", Journal of Sound and Vibration (2014), 333, pp. 1485-1508

Pagani A., Petrolo M., Carrera E.. "Flutter analysis by refined 1D dynamic stiffness elements and doublet lattice method", Advances in Aircraft and Spacecraft Science (2014), 1(3), pp. 291-310

Pagani A., Zangallo F., Carrera E.. “Influence of Non-Structural Localized Inertia on Free Vibration Response of Thin-Walled Structures by Variable Kinematic Beam Formulations”, Shock and Vibration (2014), vol. 2014, Article ID 141982, 16 pages

Natarajan S., Ferreira A.J.M., Bordas S., Carrera E., Cinefra M., Zenkour A.M.. "Analaysis of functionally graded material plates using triangular elements with cell-based smoothed discrete shear gap method",  Mathematical Problems in Engineering (2014), vol. 2014 n. ID 247

Carrera E., Zappino E.. "Aeroelastic analysis of pinched panel in variable supersonic flow changing with altitude", Journal of Spacecraft and Rockets (2014), 51(1), pp. 187-199

Ferreira A. J. M., Carrera E., Cinefra M., Viola E., Tornabene F., Fantuzzi N., Zenkour A. M.. "Analysis of thick isotropic and cross-ply laminated plates by generalized differential quadrature method and a Unified Formulation", Composites: Part B (2014), 58, pp. 544-552

Carrera E., Zappino E., Patocka K., Komarek M., Ferrarese A., Montabone M., Kotzias B., Huermann B., Schwane R.. "Aeroelastic analysis of versatile thermal insulation (VTI) panels with pinched boundary conditions", CEAS Space Journal (2014), 6(1), pp. 23-35

Carrera E., Pagani A., Zangallo F.. "Thin-walled beams subjected to load factors and non-structural masses", International Journal of Mechanical Sciences (2014), 81, pp. 109-119

Fazzolari F.A., Carrera E.. "Coupled thermoelastic effect in free vibration analysis of anisotropic multilayered plates and FGM plates by using a variable-kinematics Ritz formulation", European Journal of Mechanics A/Solids (2014), 44, pp.157-174

Rodrigues J. D., Natarajan S., Ferreira A. J. M., Carrera E., Cinefra M., Bordas S. P. A.. "Analysis of composite plates through cell-based smoothed finite element and 4-noded mixed interpolation of tensorial components techniques", Computers and Structures (2014), 135, pp. 83-87

Pagani A., Carrera E., Boscolo M., Banerjee J.R.. "Refined dynamic stiffness elements applied to free vibration analysis of generally laminated composite beams with arbitrary boundary conditions", Composite Structures (2014), 110, pp. 305-316

Mashat Daoud S., Carrera E., Zenkour Ashraf M., Al Khateeb Sadah A., Filippi M.. "Free vibration of FGM layered beams by various theories and finite elements", Composites (2014), Part B 59, pp. 269-278

Carrera E., Pagani A.. "Multi-line enhanced beam model for the analysis of laminated composite structures", Composites (2014), Part B 57, pp. 112-119

Tornabene F., Fantuzzi N., Viola E., Carrera E.. "Static analysis of doubly-curved anisotropic shells and panels using CUF approach, differential geometry and differential quadrature method", Composite Structures (2014), 107, pp. 675-697

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2013

 

Carrera E., Zappino E., Petrolo M.. "Analysis of thin-walled structures with longitudinal and transversal stiffeners", Journal of Applied Mechanics (2013), 80(1) / 011006, pp. 1-12

Carrera E., Pagani A., Petrolo M.. "Classical, Refined, and Component-Wise Analysis of Reinforced-Shell Wing Structures", AIAA Journal (2013), Vol. 51, 5, pp. 1255-1268

Ibrahim S.M., Alsayed S.H., Abbas H., Carrera E., Al-Salloum Y.A., Almusallam T.H.. "Free vibration of tapered beams and plates based on unified beam theory", Journal of Vibration and Control (2013), 0(0), pp. 1-14

Cinefra M., Carrera E.. "Shell finite elements with different through-the-thickness kinematics for the linear analysis of cylindrical multilayered structures", International Journal for Numerical Methods in Engineering (2013), 93, pp. 160-182

Petrolo M.. "Flutter analysis of composite lifting surfaces by the 1D Carrera Unified Formulation and the doublet lattice method", Composite Structures (2013) 95, pp. 539-546

Giunta G., Metla N., Belouettar S., Ferreira A.J.M., Carrera E.. "A Thermo-Mechanical Analysis of Isotropic and Composite Beams via Collocation with Radial Basis Functions", Journal of Thermal Stresses (2013), 36, pp. 1169-1199

Fazzolari F.A., Carrera E.. "Advances in the Ritz formulation for free vibration response of doubly-curved anisotropic laminated composite shallow and deep shells", Composite Structures (2013), 101, pp. 111-128

Neves A. M. A., Ferreira A. J. M., Carrera E., Cinefra M., Roque C. M. C., Jorge R. M. N., Soares C. M. M.. "Free vibration analysis of functionally graded shells by a higher-order shear deformation theory and radial basis functions collocation, accounting for through-the-thickness deformations", European Journal of Mechanics A/Solids (2013), 37, pp. 24-34

Carrera E., Maiarù M., Petrolo M., Giunta G.. "A refined 1D element for the structural analysis of single and multiple fiber/matrix cells", Composite Structures (2013), 96, pp. 455-468

Khalili S.M.R., Botshekanan Dehkordi M., Carrera E.. "A nonlinear finite element model using a unified formulation for dynamic analysis of multilayer composite plate embedded with SMA wires", Composite Structures (2013), 106, pp. 635-645

Chinosi C., Cinefra M., Della Croce L., Carrera E.. "Reissner's mixed variational theorem toward MITC finite elements for multilayered plates", Composite Structures (2013), 99, pp. 443-452

Giunta G., Crisafulli D., Belouettar S., Carrera E.. "A thermo-mechanical analysis of functionally graded beams via hierarchical modelling", Composite Structures (2013), 95, pp. 676-690

Ferreira A. J. M., Roque C. M. C., Carrera E., Cinefra M., Polit O.. "Bending and Vibration of Laminated Plates by a Layerwise Formulation and Collocation with Radial Basis Functions", Mechanics of Advanced Materials and Structures (2013), 20, pp. 624-637

Pagani A., Boscolo M., Banerjee J.R., Carrera E.. "Exact dynamic stiffness elements based on one-dimensional higher-order theories for free vibration analysis of solid and thin-walled structures", Journal of Sound and Vibration (2013), 332, pp. 6104-6127

Carrera E., Pagani A., Petrolo M.. "Component-Wise Method Applied to Vibration of Wing Structures", Journal of Applied Mechanics (2013), Vol. 80 / 041012, pp. 1-15

Fazzolari F.A., Carrera E.. "Accurate free vibration analysis of thermo-mechanically pre/post-buckled anisotropic multilayered plates based on a refined hierarchical trigonometric Ritz formulation", Composite Structures (2013), 95, pp. 381-402

Neves A. M. A., Ferreira A. J. M., Carrera E., Cinefra M., Roque C. M. C., Jorge R. M. N., Soares C. M. M.. "Static, free vibration and buckling analysis of isotropic and sandwich functionally graded plates using a quasi-3D higher-order shear deformation theory and a meshless technique", Composites: Part B (2013), 44, pp. 657-674

Carrera E., Cinefra M., Fazzolari F. A.. "Some results on thermal stress of layered plates and shells by using Unified Formulation", Journal of Thermal Stresses (2013), 36, pp. 589-625

Ferreira A. J. M., Carrera E., Cinefra M., Roque C. M. C.. "Radial basis functions collocation for the bending and free vibration analysis of laminated plates using the Reissner-Mixed Variational Theorem", European Journal of Mechanics A/Solids (2013), 39, pp. 104-112

Carrera E., Pagani A., Petrolo M.. "Use of Lagrange multipliers to combine 1D variable kinematic finite elements", Computers and Structures (2013), 129, pp. 194-206

Mashat Daoud S., Carrera E., Zenkour Ashraf M., Al Khateeb Sadah A.. "Axiomatic/asymptotic evaluation of multilayered plate theories by using single and multi-points error criteria", Composite Structures (2013), 106, pp. 393-406

Cinefra M., Chinosi C., Della Croce L.. "MITC9 Shell Elements Based on Refined Theories for the Analysis of Isotropic Cylindrical Structures", Mechanics of Advanced Materials and Structures (2013), 20, pp. 91-100

Carrera E., Filippi M., Zappino E.. "Free vibration analysis of rotating composite blades via Carrera Unified Formulation", Composite Structures (2013), 106, pp. 317-325

Botshekanan Dehkordi M., Cinefra M., Khalili S.M.R., Carrera E.. "Mixed LW/ESL models for the analysis of sandwich plates with composite faces", Composite Structures (2013), 98, pp. 330-339

Carrera E., Filippi M., Zappino E.. "Laminated beam analysis by polynomial, trigonometric, exponential and zig-zag theories", European Journal of Mechanics A/Solids (2013), 41, pp. 58-69

Ferreira A. J. M., Araùjo A. L., Neves A. M. A., Rodrigues J. D., Carrera E., Cinefra M., Mota Soares C. M.. "A finite element model using a unified formulation for the analysis of viscoelastic sandwich laminates", Composites: Part B (2013), 45, pp. 1258-1264

Carrera E., Filippi M., Zappino E.. "Analysis of Rotor Dynamic by One-Dimensional Variable Kinematic Theories", Journal of Engineering for Gas Turbines and Power (2013), Vol. 135 / 092501, pp. 1-9

Carrera E., Zappino E., Filippi M.. "Free Vibration Analysis of Thin-Walled Cylinders Reinforced with Longitudinal and Transversal Stiffeners", Journal of Vibration and Acoustics (2013), Vol. 135 / 011019, pp. 1-11

Fazzolari F.A., Carrera E.. "Free vibration analysis of sandwich plates with anisotropic face sheets in thermal environment by using the hierarchical trigonometric Ritz formulation", Composites: Part B (2013), 50, pp. 67-81

Natarajan S., Ferreira A. J. M., Bordas S. P. A., Carrera E., Cinefra M.. "Analysis of composite plates by a unified formulation-cell based smoothed finite element method and field consistent elements", Composite Structures (2013), 105, pp. 75-81

Carrera E., Pagani A.. "Analysis of reinforced and thin-walled structures by multi-line refined 1D/beam models", International Journal of Mechanical Sciences (2013), 75, pp. 278-287

Khalili S.M.R., Botshekanan Dehkordi M., Carrera E., Shariyat M.. "Non-linear dynamic analysis of a sandwich beam with pseudoelastic SMA hybrid composite faces based on higher order finite element theory", Composite Structures (2013), 96, pp. 243-255

Thai Chien H., Ferreira A.J.M., Carrera E., Nguyen-Xuan H.. "Isogeometric analysis of laminated composite and sandwich plates using a layerwise deformation theory", Composite Structures (2013), 104, pp. 196-214

Giunta G., Biscani F., Belouettar S., Ferreira A.J.M., Carrera E.. "Free vibration analysis of composite beams via refined theories", Composite: Part B (2013), 44, pp. 540-552

Brischetto S., Carrera E.. "Static analysis of multilayered smart shells subjected to mechanical, thermal and electrical loads", Meccanica (2013), 48, 1263-1287

Carrera E., Varello A., Demasi L.. "A refined structural model for static aeroelastic response and divergence of metallic and composite wings", CEAS Aeronautical Journal (2013), 4, pp. 175-189

Varello A., Lamberti A., Carrera E.. "Static Aeroelastic Response of Wing-Structures Accounting for In-Plane Cross-Section Deformation", International Journal of Aeronautical & Space Sciences (2013), 14(4), pp. 310-323

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2012

 

Carrera E., Petrolo M., Zappino E.. "Performance of CUF approach to analyze the structural behaviour of slender bodies", Journal of Structural Engineering (2012), 138(2), pp. 285-297

Carrera E., Petrolo M.. "Refined One-Dimensional Formulations for Laminated Structure Analysis", AIAA Journal (2012), Vol. 50, N° 1, pp. 176-189

Carrera E., Petrolo M., Varello A.. "Advanced Beam Formulations for Free-Vibration Analysis of Conventional and Joined Wings", Journal of Aerospace Enginneering (2012), 25(2), pp. 282-293

Neves A. M. A., Ferreira A. J. M., Carrera E., Cinefra M., Jorge R. M. N., Soares C. M. M.. "Static analysis of functionally graded sandwich plates according to a hyperbolic theory considering Zig-Zag and warping effects", Advances in Engineering Software (2012), 52, pp. 30-43

Giunta G., Catapano A., Belouettar S., Vannucci P., Carrera E.. "Failure Analysis of Composite Plates Subjected to Localized Loadings via a Unified Formulation", Journal of Engineering Mechanics, 138, pp. 458-467

Cinefra M., Carrera E., Della Croce L., Chinosi C.. "Refined shell elements for the analysis of functionally graded structures", Composite Structures (2012), 94, pp. 415-422

Carrera E., Varello A.. "Dynamic response of thin-walled structures by variable kinematic one-dimensional models", Journal of Sound and Vibration (2012), 331, pp. 5268-5282

Petrolo M.. "Advanced 1D Structural Models for Flutter Analysis of Lifting Surfaces", International Journal of Aeronautical & Space Sciences (2012), 13(2), pp. 199-209

Ferreira A. J. M., Roque C. M. C., Carrera E., Cinefra M., Polit O.. "Analysis of sandwich plates by radial basis functions collocation, according to Murakami's Zig-Zag theory", Journal of Sandwich Structures and Materials (2012), 14(5), pp. 505-524

Carrera E., Maiarù M., Petrolo M.. "Component-wise analysis of laminated anisotropic composites", International Journal of Solids and Structures (2012), 49, pp. 1839-1851

Neves A. M. A., Ferreira A. J. M., Carrera E., Roque C. M. C., Cinefra M., Jorge R. M. N., Soares C. M. M.. "A quasi-3D sinusoidal shear deformation theory for the static and free vibration analysis of functionally graded plates", Composites: Part B (2012), 43, pp. 711-725

Carrera E., Miglioretti F., Petrolo M.. "Computations and evaluations of higher-order theories for free vibration analysis of beams", Journal of Sound and Vibration (2012), 331, pp. 4269-4284

Ibrahim S.M., Carrera E., Petrolo M., Zappino E.. "Buckling of composite thin walled beams by refined theory", Composite Structures, 94(2), pp. 563-570

Neves A. M. A., Ferreira A. J. M., Carrera E., Cinefra M., Roque C. M. C., Jorge R. M. N., Soares C. M. M.. "A quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates", Composite Structures (2012), 94, pp. 1814-1825

Carrera E., Petrolo M.. "Refined beam elements with only displacement variables and plate/shell capabilities", Meccanica (2012), 47, pp. 537-556

Rodrigues J. D., Roque C. M. C., Ferreira A. J. M., Cinefra M., Carrera E.. "Radial basis functions-differential quadrature collocation and a unfied formulation for bending, vibration and buckling analysis of laminated plates, according to Murakami's Zig-Zag theory", Computers and Structures (2012), 90-91, pp. 107-115

Petrolo M., Zappino E., Carrera E.. "Refined free vibration analysis of one-dimensional structures with compact and bridge-like cross-sections", Thin-Walled Structures (2012), 56, pp. 49-61

Ibrahim S.M., Carrera E., Petrolo M., Zappino E.. "Buckling of thin-walled beams by a refined theory", Journal of Zhejiang University. Science A, 13(10), pp. 747-759

Brischetto S., Carrera E.. "Analysis of nano-reinforced layered plates via classical and refined two-dimensional theories", Multidiscipline Modeling in Materials and Structures (2012), 8(1), pp. 4-31

Neves A. M. A., Ferreira A. J. M., Carrera E., Cinefra M., Jorge R. M. N., Soares C. M. M.. "Buckling analysis of sandwich plates with functionally graded skins using a new quasi-3D hyperbolic sine shear deformation theory and collocation with radial basis functions", Zeitschrift für Angewandte Mathematik und Mechanik (2012), 92(9), pp. 749-766

Brischetto S., Carrera E.. "Classical and refined shell models for the analysis of nano-reinforced structures", International Journal of Mechanical Sciences (2012), 55, pp. 104-117

Carrera E., Miglioretti F.. "Selection of appropriate multilayered plate theories by using a genetic like algorithm", Composite Structures (2012), 94, pp. 1175-1186

Dozio L., Carrera E.. "Ritz analysis of vibrating rectangular and skew multilayered plates based on advanced variable-kinematic models", Composite Structures (2012), 94, pp. 2118-2128

Brischetto S., Polit O., Carrera E.. "Refined shell model for the linear analysis of isotropic and composite elastic structures", European Journal of Mechanics A/Solids (2012), 34, pp. 102-119

Nali P., Carrera E.. "A numerical assessment on two-dimensional failure criteria for composite layered structures", Composites: Part B (2012), 43, pp. 280-289

Carrera E., Nali P., Lecca S., Soave M.. "Effects of in-plane loading on vibration of composite plates", Shock and Vibration (2012), 19, pp. 619-634

Brischetto S., Carrera E.. "Free vibration analysis for layered shells accounting of variable kinematic and thermo-mechanical coupling", Shock and Vibration (2012), 19, pp. 155-173

Biscani F., Giunta G., Belouettar S., Carrera E., Hu H.. "Variable kinematic plate elements coupled via Arlequin method", International Journal for Numerical Methods in Engineering (2012), 91, pp. 1264-1290

Brischetto S., Carrera E.. "Coupled Thermo-Electro-Mechanical Analysis of Smart Plates Embedding Composite and Piezoelectric Layeres", Journal of Thermal Stresses (2012), 35, pp. 766-804

Biscani F., Nali P., Belouettar S., Carrera E.. "Coupling of hierarchical piezoelectric plate finite elements via Arlequin method", Journal of Intelligent Material Systems and Structures (2012), 23(7), pp. 749-764

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2011

 

Carrera E., Petrolo M.. "On the Effectiveness of Higher-Order Terms in Refined Beam Theories", Journal of Applied Mechanics (2011), Vol. 78 / 021013, pp. 1-17

Carrera E., Miglioretti F., Petrolo M.. "Accuracy of refined finite elements for laminated plate analysis", Composite Structures (2011), 93, pp. 1311-1327

Giunta G., Biscani F., Belouettar S., Carrera E.. "Analysis of Thin-Walled Beams via a One-Dimensional Unified Formulation Through a Navier-Type Solution", International Journal of Applied Mechanics (2011), 3(3), pp. 407-434

Cinefra M., Carrera E., Brischetto S.. "Refined Shell Models for the Vibration Analysis of Multiwalled Carbon Nanotubes", Mechanics of Advanced Materials and Structures (2011), 18, pp. 476-483

Neves A. M. A., Ferreira A. J. M., Carrera E., Roque C. M. C., Cinefra M., Jorge R. M. N., Soares C. M. M.. "Bending of FGM plates by a sinusoidal plate formulation and collocation with radial basis functions", Mechanics Research Communications (2011), 38, pp. 368-371

Carrera E., Petrolo M., Nali P.. "Unified formulation applied to free vibrations finite element analysis of beams with arbitrary section", Shock and Vibration (2011), 18, pp. 485-502

Ferreira A. J. M., Roque C. M. C., Carrera E., Cinefra M., Polit O.. " Two higher order Zig-Zag theories for the accurate analysis of bending, vibration and buckling response of laminated plates by radial basis function collocation and a Unified Formulation", Journal of Composite Materials (2011), 45(24), pp. 2523-2536

Cinefra M., Soave M.. "Accurate Vibration Analysis of Multilayered Plates Made of Functionally Graded Materials", Mechanics of Advanced Materials and Structures (2011), 18, pp. 3-13

Ferreira A. J. M., Roque C. M. C., Carrera E., Cinefra M., Polit O.. "Radial basis functions collocation and a unfiied formulation for bending, vibration and buckling analysis of laminated plates, according to a varation of Murakami's zig-zag theory", European Journal of Mechanics A/Solids (2011), 30, pp. 559-570

Fazzolari F.A., Carrera E.. "Advanced variable kinematics Ritz and Galerkin formulations for accurate buckling and vibration analysis of anisotropic laminated composite plates", Composite Structures (2011), 94, pp. 50-67

Carrera E., Miglioretti F., Petrolo M.. "Guidelines and Recommendations on the Use of Higher Order Finite Elements for Bending Analysis of Plates", International Journal for Computational Methods in Engineering Science and Mechanics (2011), 12, pp. 303-324

He Q.Z., Hu H., Belouettar S., Guinta G., Yu K., Liu Y., Biscani F., Carrera E., Potier-Ferry M.. "Multi-scale modelling of sandwich structures using hierarchical kinematics", Composite Structures (2011), 93, pp. 2375-2383

Carrera E., Soave M.. "Use of functionally graded material layers in a two-layered pressure vessel", Journal of Pressure Vessel Technology (2011), 133

Carrera E., Fazzolari F.A., Demasi L.. "Vibration Analysis of Anisotropic Simply Supported Plates by Using Variable Kinematic and Rayleigh-Ritz Method", Journal of Vibration and Acoustics (2011), 133, pp. 1-16

Ferreira A. J. M., Carrera E., Cinefra M., Roque C. M. C., Polit O.. "Analysis of laminated shells by a sinusoidal shear deformation theory and radial basis functions collocation, accounting for through-the-thickness deformations", Composites: Part B (2011), 42, pp. 1276-1284

Carrera E., Brischetto S., Cinefra M., Soave M.. "Effects of thickness stretching in functionally graded plates and shells", Composites: Part B (2011), 42, pp. 123-133

Nali P., Carrera E., Lecca S.. "Assessments of refined theories for buckling analysis of laminated plates", Composite Structures (2011), 93, pp. 456-464

Ferreira A. J. M., Carrera E., Cinefra M., Roque C. M. C.. "Analysis of laminated doubly-curved shells by a layerwise theory and radial basis functions collocation, accounting for through-the-thickness deformations", Computational Mechanics (2011), 48, pp. 13-25

Carrera E., Campisi C., Cinefra M., Soave M.. "Evaluation of various theories of the thickness and curvature approximations for free vibrational analysis of cylindrical and spherical shells", International Journal of Vehicle Noise and Vibration (2011), 7(1), pp. 16-36

Catapano A., Giunta G., Belouettar S., Carrera E.. "Static analysis of laminated beams via a unified formulation", Composite Structures (2011), 94, pp. 75-83

Ferreira A. J. M., Roque C. M. C., Carrera E., Cinefra M.. "Analysis of thick isotropic and cross-ply laminated plates by radial basis functions and a Unified Formulation", Journal of Sound and Vibration (2011), 330, pp. 771-787

Dozio L., Carrera E.. "A variable kinematic Ritz formulation for vibration study of quadrilateral plates with arbitrary thickness", Journal of Sound and Vibration (2011), 330, pp. 4611-4632

Brischetto S., Carrera E.. "Heat conduction and thermal analysis in multilayered plates and shells", Mechanics Research Communications (2011), 38, pp. 449-455

Biscani F., Giunta G., Belouettar S., Carrera E., Hu H.. "Variable kinematic beam elements coupled via Arlequin method", Composite Structures (2011), 93, pp. 697-708

Giunta G., Crisafulli D., Belouettar S., Carrera E.. "Hierarchical theories for the free vibration analysis of functionally graded beams", Composite Structures (2011), 94, pp. 68-74

Biscani F., Nasser H., Belouettar S., Carrera E.. "Equivalent electro-elastic properties of Macro Fiber Composite (MFC) transducers usgin asymptotic expansion approach", Composites: Part B (2011), 42, pp. 444-455

Giunta G., Biscani F., Belouettar S., Carrera E.. "Hierarchical modelling of doubly curved laminated composite shells under distributed and localised loadings", Composites: Part B (2011), 42, pp. 682-691

Varello A., Carrera E., Demasi L.. "Vortex Lattice Method Coupled with Advanced One-Dimensional Structural Models", Journal of Aeroelasticity and Structural Dynamics (2011), 2, pp. 53-78

Nali P., Carrera E., Calvi A.. "Advanced fully coupled thermo-mechanical plate elements for multilayered structures subjected to mechanical and thermal loading", International Journal for Numerical Methods in Engineering (2011), 85, pp. 869-919

Carrera E., Brischetto S.. "Modeling and Analysis of Functionally Graded Beams, Plates and Shells: Part II", Mechanics of Advanced Materials and Structures (2011), 18, pp. 1-2

Koutsawa Y., Biscani F., Belouettar S., Nasser H., Carrera E.. "Toward Micromechanics of Coupled Fields Materials Containing Functionally Graded Inhomogeneities: Multi-Coating Approach", Mechanics of Advanced Materials and Structures (2011), 18, pp. 524-530

Brischetto S., Carrera E.. "Thermomechanical Effect in Vibration Analysis of One-Layered and Two-Layered Plates", International Journal of Applied Mechanics (2011), 3(1), pp. 161-185

Carrera E., Crisafulli D., Giunta G., Belouettar S.. "Evaluation of various through the thickness and curvature approximations in free vibration analysis of cylindrical composites shells", International Journal of Vehicle Noise and Vibration (2011), 7(3), pp. 212-237

Carrera E., Lecca S., Nali P., Soave M.. "Influence of In-Plane Axial and Shear Loading on the Vibration of Metallic Plates", International Journal of Applied Mechanics (2011), 3(3), pp. 447-467

Rodrigues J.D., Roque C.M.C., Ferreira A.J.M., Carrera E., Cinefra M.. "Radial basis functions-finite differences collocation and a Unified Formulation for bending, vibration and buckling analysis of laminated plates, according to Murakami's zig-zag theory", Composite Structures (2011), 93, pp. 1613-1620

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2010

 

Carrera E., Petrolo M.. "Guidelines and Reccomendations to Construct Theories for Metallic and Composite Plates", AIAA Journal (2010), Vol. 48, N° 12, pp.2852-2866

Cinefra M., Belouettar S., Soave M., Carrera E.. "Variable kinematic models applied to free-vibration analysis of functionally graded material shells", European Journal of Mechanics A/Solids (2010), 29, pp. 1078-1087

D'Ottavio M., Carrera E.. "Variable-Kineamatics Approach for Linearized Buckling Analysis of Laminated Plates and Shells", AIAA Journal (2010), Vol. 48, N° 9, pp. 1987-1996

Carrera E., Cosatto C.. "Flight mechanics analysis of a motorized trike with composite wing", Journal of Aerospace Engineering (2010), 23(4), pp. 251-264

Brischetto S., Carrera E.. "Coupled thermo-mechanical analysis of one-layered and multilayered plates", Composite Structures (2010), 92, pp. 1793-1812

Cinefra M., Carrera E., Brischetto S., Belouettar S.. "Thermo-Mechanical Analysis of Functionally Graded Shells", Journal of Thermal Stresses (2010), 33, pp. 942-963

Carrera E., Giunta G., Nali P., Petrolo M.. "Refined beam elements with arbitrary cross-section geometries", Computers and Structures (2010), 88, pp. 283-293

Carrera E., Cinefra M., Nali P.. "MITC technique extended to variable kinematic multilayered plate elements", Composite Structures (2010), 92, pp. 1888-1895

Carrera E., Brischetto S., Cinefra M.. "Variable Kinematics and Advanced Variational Statements for Free Vibrations Analysis of Piezoelectric Plates and Shells", Computer Modeling in Engineering & Sciences (2010), 65(3), pp. 259-341

Brischetto S., Carrera E.. "Advanced mixed theories for bending analysis of functionally graded plates", Computers and Structures (2010), 88, pp. 1474-1483

Carrera E., Nali P.. "Multilayered plate elements for the analysis of multifield problems", Finite Element in Analysis and Design (2010), 46, pp. 732-742

Carrera E., Brischetto S., Cinefra M., Soave M.. "Refined and Advanced Models for Multilayered Plates and Shells Embedding Functionally Graded Material Layers", Mechanics of Advanced Materials and Structures (2010), 17, pp. 603-621

Koutsawa Y., Biscani F., Belouettar S., Nasse H., Carrera E.. "Multi-coating inhomogeneities approach for the effective thermo-electro-elastic properties of piezoelectric composite materials", Composite Structures (2010), 92, pp. 964-972

Brischetto S., Carrera E.. "Importance of Higher Order Modes and Refined Theories in Free Vibration Analysis of Composite Plates", Journal of Applied Mechanics (2010), 77, pp. 1-14

Giunta G., Carrera E., Belouettar S.. "Free vibration analysis of composite plates via refined theories accounting for uncertainties", Shock and Vibration (2010), 18, pp. 537-554

Giunta G., Belouettar S., Carrera E.. "Analysis of FGM Beams by Means of Classical and Advanced Theories", Mechanics of Advanced Materials and Structures (2010), 17, pp. 622-635

Biscani F., Koutsawa Y., Belouettar S., Carrera E.. "Effective properties of electro-elastic composites with multi-coating inhomogeneities", Advanced Materials Research (2010), 93-93, pp. 190-193

Brischetto S., Carrera E.. "Coupled Thermo-Mechanical Analysis of One-Layered and Multilayered Isotropic and Composite Shells", Computer Modeling in Engineering & Sciences (2010), 56, pp. 249-301

Carrera E., Büttner A., Nali P.. "Mixed Elements for the Analysis of Anisotropic Multilayered Piezoelectric Plates", Journal of Intelligent Material Systems and Structures, 21, pp. 701-717

Carrera E., Büttner A., Nalif J.P., Wallmerperger T., Kröplin B.. "A Comparison of Various Two-Dimensional Assumptions in Finite Element Analysis of Multilayered Plates", International Journal for Computational Methods in Engineering Science and Mechanics (2010), 11, pp. 313-327

Carrera E., Nali P.. "Classical and Mixed Finite Plate Elements for the Analysis of Multifield Problems and Smart Layered Structures", Acta Mechanica Sinica 2010, 23, pp. 115-121

Carrera E., Robaldo A.. "Hierarchic finite elements based on a unified formulation for the static analysis of shear actuated multilayered piezoelectric plates", Multidiscipline Modeling in Materials and Structures (2010), 6(1), pp. 45-77

Carrera E., Giunta G.. "Refined Beam Theories Based on a Unified Formulation", International Journal of Applied Mechanics (2010), 2(1), pp. 117-143

Carrera E., Brischetto S.. "Modeling and analysis of functionally graded beams, plates and shells: Part I", Mechanics of Advanced Materials and Structures (2010), 17(8), pp. 585

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2009

 

Carrera E., Giunta G.. "Hierarchical Evaluation of Failure Parameters in Composite Plates", AIAA Journal (2009), Vol. 47, N° 3, pp. 692-702

Brischetto S., Carrera E., Demasi L.. "Improved bending analysis of sandwich plates using a zig-zag function", Composite Structures (2009), 89, pp. 408-415

Carrera E., Nali P.. "Mixed piezoelectric plate elements with direct evaluation of transverse electric displacement", International Journal for Numerical Methods in Engineering (2009), 80, pp. 403-424

Brischetto S., Carrera E., Demasi L.. "Improved Response of Unsymmetrically Laminated Sandwich Plates by Using Zig-zag Functions", Journal of Sandwich Structures and Materials (2009), 11, pp. 257-267

Brischetto S., Carrera E., Demasi L.. "Free vibration of sandwich plates and shells by using Zig-Zag function", Schock and Vibration (2009), 16, pp. 495-503

Brischetto S., Carrera E.. "Refined 2D Models for the Analysis of Functionally Graded Piezoelectric Plates", Journal of Intelligent Material Systems and Structures (2009), 20, pp. 1783-1797

Brischetto S., Carrera E.. "Thermal Stress Analysis by Refined Multilayered Composite Shell Theories", Journal of Thermal Stresses (2009), 32, pp. 165-186

Carrera E., Giunta G.. "Exact, Hierarchical Solutions for Localized Loadings in Isotropic Laminated, and Sandwich Shells", Journal of Pressure Vessel Technology (2009), 131(4), pp. 1-14

Carrera E., Brischetto S.. "A Survey With Numerical Assessment of Classical and Refined Theories for the Analysis of Sandwich Plates", Applied Mechanics Reviews (2009), 62(1), pp. 1-17

Carrera E., Brischetto S., Fagiano C., Nali P.. "Mixed Multilayered Plate Elements for Coupled Magneto-Electro-Elastic Analysis", Multidiscipline Modeling in Materials and Structures (2009), 5, pp. 251-256

Carrera E., Brischetto S.. "A Comparison of Various Kinematic Models for Sandwich Shell Panels with Soft Core", Journal of Composite Materials (2009), 43(20), pp. 2201-2221

Carrera E., DI Gifico M., Nali P., Brischetto S.. "Refined Multilayered Plate Elements for Coupled Magneto-Electro-Elastic Analysis", Multidiscipline Modeling in Materials and Structures (2009), 5, pp. 119-138

Carrera E., Nali P., Büettner A.. "Mixed Elements, Stress Fields and Failure Parameters in Laminated Anisotropic Plates", Aerotecnica Missili & Spazio (2009), 88, pp. 93-104

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2008

 

Carrera E., Brischetto S., Robaldo A.. "Variable Kinematic Model for the Analysis of Functionally Graded Material Plates", AIAA Journal (2008), Vol. 46 N° 1, pp. 194-203

Carrera E., Brischetto S.. "Analysis of thickness locking in classical, refined and mixed multilayered plate theories", Composite Structures (2008), 82, pp. 549-562

Kulikov G.M., Carrera E.. "Finite deformation higher-order shell models and rigid-body motions", International Journal of Solids and Structures (2008), 45, pp. 3153-3172

Brischetto S., Carrera E.. "Advanced mixed theories for bending analysis of functionally graded plates", Computers and Structures (2008), 88, pp. 1474-1483

Carrera E., Brischetto S.. "Analysis of thickness locking in classical, refined and mixed theories for layered shells", Composite Structures (2008), 85, pp. 83-90

Carrera E., Grohmann B., Wallmersperger T.. "Preface: Design Modelling and Experiments of Adaptive Structures and Smart Systems", Mechanics of Advanced Materials and Structures, 15, pp. 165-166

Brischetto S., Leetsch R., Carrera E., Wallmersperger T., Kröplin B.. "Thermo-Mechanical Bending of Functionally Graded Plates", Journal of Thermal Stresses (2008), 31, pp. 286-308

Carrera E., Giunta G.. "Hierarchical models for failure analysis of plates bent by distributed and localized transverse loadings", Journal of Zhejiang University Science A (2008), 9(5), pp. 600-613

Carrera E., Brischetto S., Nali P.. "Variational Statements and Computational Models for MultiField Problems and Multilayered Structures", Mechanics of Advanced Materials and Structures (2008), 15, pp. 182-198

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2007

 

Carrera E.. "On the use of transverse shear stress homogeneous and non-homogeneous conditions in third-order orthotropic plate theory", Composite Structures (2007), 77, pp. 341-352

Carrera E., Boscolo M.. "Classical and mixed finite elements for static and dynamic analysis of piezoelectric plates", International Journal for Numerical Methods in Engineering (2007), 70, pp. 1135-1181

Carrera E., Brischetto S.. "Piezoelectric Shell Theories with A Priori Continous Transverse Electromechanical Variables", Journal of Mechanics of Materials and Structures (2007), 2(2), pp. 377-399

Carrera E., Fagiano C.. "Mixed Piezoelectric Plate Elements with Continous Transverse Electric Displacements", Journal of Mechanics of Materials and Structures (2007), 2(3), pp. 421-438

Carrera E., Morello V., Valletti D., Algostino F.. "Simulation of Shock Wave Impact Due to Explosion on a Flying Flexible Aircraft", Combustion, Explosion, and Shock Waves (2007, 43(6), pp. 732-740

Carrera E., Brischetto S.. "Reissner Mixed Theorem Applied to Static Analysis of Piezoelectric Shells", Journal of Intelligent Material Systems and Structures (2007), 18(10), pp. 1083-1107

Carrera E., Giunta G., Brischetto S.. "Hierarchical close form solutions for plates bent by localized transverse loadings", Journal Zhejiang University Science A (2007), 8(7), pp. 1026-1037

Robaldo A., Carrera E.. "Mixed FInite Elements for Thermoelastic Analysis of Multilayered Anisotropic Plates", Journal of Thermal Stresses (2007), 30, pp. 165-194

Carrera E., Robaldo A.. "Extension of Reissner's mixed variational principle to thermopiezoelasticity", Atti della Accademia delle Scienze di Torino (2007). 31, pp. 27-42

Carrera E., Boscolo M., Robaldo A.. "Hierarchic Multilayered Plate Elements for Coupled Multifield Problems of Piezoelectric Adaptive Structures: Formulation and Numerical Assessment", Archives of Computational Methods in Engineering (2007), 14, pp. 383-430

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2006

 

D'Ottavio M., Ballhause D., Kroplin B., Carrera E.. "Closed-form solutions for the free-vibration problem of multilayered piezoelectric shells", Computers and Structures (2006), 84, pp. 1506-1518

Robaldo A., Carrera E., Benjeddou A.. "A unified formulation for finite element analysis of piezoelectric adaptive plates", Computers and Structures (2006), 84, pp. 1494-1505

Carrera E., Topping B.H.V., Mota Soares C.A.. "Computational Models for Multilayered Structures and Composite Structures", Computers and Structures (2006), 84, pp. 1173-1176

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2005

 

Carrera E.. "Transverse Normal Strain Effects on Thermal Stress Analysis of Homogeneous and Layered Plates", AIAA Journal (2005), Vol. 43, N° 10, pp. 2232-2242

Ballhause D., D'Ottavio M., Kroplin B., Carrera E.. "A unified formulation to asses multilayered theories for piezoelectric plates", Computers & Structures (2005), 83, pp. 1217-1235

Carrera E., Ciuffreda A.. "Bending of composites and sandwich plates subjected to localized lateral loadings: a comparison of various theories", Composite Structures (2005), 68, pp. 185-202

Carrera E., Ciuffreda A.. "A unified formulation to asses theories of multilayered plates for various bending problems", Composite Structures (2005), 69, pp. 271-293

Robaldo A., Carrera E., Benjeddou A.. "Unified Formulation for Finite Element Thermoelastic Analysis of Multilayered Anisotropic Composite Plates", Journal of Thermal Stresses (2005), 28, pp. 1031-1065

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2004

 

Carrera E.. "On the use of the Murakami's zig-zag function in the modeling of layered plates and shells", Computers and Structures (2004), 82, pp. 541-554

Carrera E., Ciuffreda A.. "Closed-Form Solutions to Assess Multilayered-Plate Theories for Various Thermal Stress Problems", Journal of Thermal Stresses (2004), 27, pp. 1001-1031

Carrera E.. "Assessment of theories for free vibration analysis of homogeneous and multilayered plates", Shock and Vibration (2004), 11, pp. 261-270

Grossini M., Carrera E., Abbà A.. "Dynamic Models for Shimmy Analysis of Helicopter Landing Gear", International Journal of Mechanics and Control (2004)

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2003

 

Carrera E., Demasi L.. "Two Benchmarks to Asses Two-Dimensional Theories of Sandwich, Composite Plates",  AIAA Journal (2003), Vol. 41, N° 7, pp. 1356-1362

Carrera E.. "Theories and Finite Elements for Multilayered Plates and Shells: A Unified Compact Formulation with Numerical Assessment and Benchmarking", Archives of Computational Methods in Engineering (2003), Vol. 10, 3, pp. 215-296

Carrera E., Mannella L., Augello G., Gualtieri N.. "A two-level optimization feature for the design of aerospace structures", Journal of Aeorspace Engineering, 217 n. G4, pp. 189-206

Carrera E.. "Historical review of Zig-Zag theories for multilayered plates and shells", Applied Mechanics Reviews (2003), 56, pp. 287-308

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2002

 

Carrera E.. "Temperature Profile Influence on Layered Plates Response Considering Classical and Advanced Theories", AIAA Journal (2002), Vol. 40, N° 9, pp. 1885-1896

Carrera E.. "Theories and FInite Elements for Multilayered, Anisotropic, Composite Plates and Shells", Archives of Computational Methods in Engineering (2002), 9, pp. 87-140

Carrera E., Demasi L.. "Classical and advanced multilayered plate elements based upon PVD and RMVT. Part 1: Derivation of finite element matrices, Part 2: Numerical Implementations", International Journal for Numerical Methods in Engineering (2002), 55, pp. 191-231, pp. 253-291

Carrera E., Demasi L., Manganello M.. "Assessment of Plate Elements on Bending and Vibrations of Composite Structures", Mechanics of Advanced Materials and Structures, 9, pp. 333-357

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2001

 

Carrera E.. "Developments, Ideas and Evaluations based upon the Reissner's Mixed Variational Theorem in the Modeling of Multilayered Plates and Shells", Applied Mechanics Review (2001), vol 54, pp 301-329

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 2000

 

Carrera E.. "Single- vs Multilayer Plate Modelings on the Basis of Reissner's Mixed Theorem", AIAA Journal (2000), Vol. 38, N° 2, pp. 342-352

Brank B., Carrera E.. "A family of shear-deformable shell finite elements for composite structures", Computers and Structures (2000), 76, pp. 287-297

Carrera E.. "An assessment of mixed and classical theories on global and local response of multilayered orthotropic plates", Composite Structures (2000), 50, pp. 183-198

Carrera E.. "A priori vs. a posteriori evaluation of transverse stresses in multilayered orthotropic plates", Compoiste Structures (2000), 48, pp. 245-260

Brank B., Carrera E.. "Multilayered shell finite element with interlaminar continous shear stresses: a refinement of the Reissner-Mindlin formulation", International Journal for Numerical Methods in Engineering (2000), 48, pp. 843-874

Carrera E.. "An Assessment of Mixed and Classical Theories for the Thermal Stress Analysis of Orthotropic Multilayered Plates", Journal of Thermal Stresses (2000), 23, pp. 797-831

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 1999

 

Carrera E.. "Multilayered Shell Theories Accounting for Layerwise Mixed Description, Part 1: Governing Equations", AIAA Journal (1999), Vol. 37, N° 9, pp. 1107-1116

Carrera E.. "Multilayered Shell Theories Accounting for Layerwise Mixed Description, Part 2: Numerical Evaluations", AIAA Journal (1999), Vol. 37, N° 9, pp. 1117-1124

Carrera E.. "A study of transverse normal stress effect on vibration of multilayered plates and shells", Journal of Sound and Vibration (1999), 225(5), pp. 803-829

Carrera E.. "A Reissner's Mixed Variational Theorem Applied to Vibration Analysis of Multilayered Shell", Journal of Applied Mechanics (1999), 66, pp. 69-78

Carrera E.. "Transverse Normal Stress Effects in Multilayered Plates", Journal of Applied Mechanics (1999), 66, pp. 1004-1012

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 1998

 

Carrera E:. "A Refined Multilayered finite-element model applied to linear and non-linear analysis of sandwich plates", Composites Science and Technology (1998), 58, pp. 1553-1569

Carrera E.. "Evaluation of Layerwise Mixed Theories for Laminated Plates Analysis", AIAA Journal (1998), Vol. 36, N° 5, pp. 830-839

Carrera E.. "Mixed layer-wise models for multilayered plates analysis", Composite Structures (1998), 43, pp. 57-70

Carrera E., Krause H.. "An investigation of non-linear dynamics of multilayered plates accounting for Cz0 requirements", Computers and Structures (1998), 69, pp. 473-486

Carrera E., Parisch H.. "An evaluation of geometrical nonlinear effects of thin and moderately thick multilayered composite shells", Composite Structures (1998), Vol. 40, n° 1, pp. 11-24

Carrera E.. "Layer-Wise Mixed Models for Accurate Vibrations Analysis of Multilayered Plates", Journal of Applied Mechanics (1998), 65, pp. 820-828

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 1997

 

Carrera E.. "An Improved Reissner-Mindlin-Type Model for the Electromechanical Analysis of Multilayered Plates Including Piezo-Layers", Journal of Intelligent Material Systems and Structures (1997), Vol. 8, pp. 232-248

Carrera E., Kroplin B.. "Zig-Zag and Interlaminar Equilibria Effects in Large-Deflection and Postbuckling Analysis of Multilayered Plates", Mechanics of Composite Materials and Structures (1997), 4, pp. 69-94

Carrera E.. "Cz0 Requirements-models for the two dimensional analysis of multilayered structures", Composite Structures (1997), Vol. 37, n° 3/4, pp. 373-383

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 1996

 

Carrera E.. "C0 Reissner-Mindlin Multilayered Plate Elements Including Zig-Zag and Interlaminar Stress Continuity", International Journal for Numerical Methods in Engineering (1996), 39, pp. 1797-1820

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 1995

 

Carrera E.. "A class of Two-Dimensional Theories for Anisotropic Multilayered Plates Analysis", Atti della Accademia delle Scienze di Torino, Classe di Scienze Fisiche, Matematiche e Naturali (1995), Vol. 19-20, pp. 49-87

Carrera E., Villani M.. "Effects of Boundary Conditions on Postbuckling of Compressed, Symmetrically Laminated Thick Plates", AIAA Journal (1995), Vol. 33, N° 8, pp. 1543-1546

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 1994

 

Carrera E.. "A Study on Arc-Length-Type Methods and their Operation Failures Illustrated by a simple model", Computers & Structures (1994), Vol. 50, n° 2, pp. 217-229

Carrera E.. "Sullo sviluppo di elementi finiti multistrato computazionalmente semplici ed efficienti e capaci di effetti tipo HSDT", Aerotecnica, Missili e Spazio (1994), Vol. 73, pp. 14-22

Carrera E.. "Reply by the author to C.T. Sun, Readers forum", AIAA JOURNAL (1994), 32, pp. 2135-2136

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 1993

 

Carrera E.. "Nonlinear Response of Asymmetrically Laminated Plates in Cylindrical Bending", AIAA Journal (1993), Vol. 31, N° 7, pp. 1353-1357

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 1992

 

Di Sciuva M., Carrera E.. "Elastodynamic Behavior of Relatively Thick, Symmetrically Laminated, Anisotropic Circular Cylindrical Shells", Journal of Applied Mechanics (1992), 59(1), pp. 222-224

 

Go to: BackPrevious YearNext YearTop

 

Journal Articles 1991

 

Carrera E.. "The Effects of Shear Deformation and Curvature on Buckling and Vibrations of Cross-ply Laminated Composite Shells", Journal of Sound and Vibration (1991), 150(3), pp. 405-433

 

Go to: Back,  Previous Year,  Next YearTop

 

Journal Articles 1990

 

Di Sciuva M., Carrera E.. "Static Buckling of Moderately Thick, Anisotropic, Laminated and Sandwich Cylindrical Shell Panels", AIAA Journal (1990), Vol. 28, N° 10, pp. 1782-1793